I don't want to take the mortise lock out until I have a new replacement. I thought your part no. 82-218 seemed to fit my measurements.
Can you confirm the following measurements to agree with your 82-218?
The large oval opening in the door is 6" high as is the entire chrome fixture; the width of the chrome fixture is 13/16". The width of the door is 1-5/8". The opening inside the chrome fixture which allows the metal hook to move up/down measures 1-9/16" high.
There are 3 screws above the opening for this metal hook, and 2 screws below this opening. I measured center of each screw for the following: the distance from the most top and bottom screws is 4-1/2". The distance from the second top and second bottom screws is 3-5/8". The third screw from the top is 1-3/4" down and looks to be the one screw to hold the metal hook in place.
I have watched your video for part 82-218, and I think I can replace the existing lock if I have the proper replacement. Do you agree with my measurements for 82-218? (I don't know "round" from "square".)
