Need 18 Replacement locks only
Thanks for posting. Could you tell me the distance between the center of each mounting hole on this sash lock? That would help a ton in narrowing down your options. Many thanks.
In that case, my top recommendation is our 90-278. Review its hole spacing below for reference. You may want to triple check that measurement just to be 110% sure.
Dose it matter if it is 1/16" or 1/18" on the circle lock?
I'm afraid I don't understand your two questions here. Can you clarify what measurement you're talking about when you describe the top of the 11/16" to the bottom? I'm also not sure what the circle lock is.
To the second question- From what I understand is that the circle lock is the half circle part of the lock that is used to lock and unlock the lock. It is located in the middle of the lock on the backside of the lock. It may be called something different to an expert. From what I have seen there are two different sizes. Would that size matter when choosing my lock? If not can you send me the link to the one that you think best fit the description?
It sounds like you're talking about the total depth of the lock and the size of the sweep itself. To be perfectly honest, I've never observed either dimension to be relevant to finding a replacement. I've definitely never heard of a difference in sweep size between 1/16" or 1/8". I'm not exactly sure what dimension that might be referring to, either.
I just ran back to measure the total depth. It's a little difficult to determine since the front edge of the lock has a curve to it, but it appears to be roughly 1-1/8".
Like I said above, I've never known either of these dimensions to be important. As long as the hole placement matches, I'm very confident that our lock can work for you.
You're very welcome! Please feel free to reach out if you wanted to know anything else. We're always here to help.