Need help identifiing replacement part

Question

Pulled roller off of interior sliding glass conference room door. All dimensions match up with 81-052 except the where the wheels are mounted. The wheel depth is right around a 1/4" and are mounted on the upper hole where in the photo of the 81-052 the wheels are mounted on the bottom holes.

Dave Sr. · Accepted Answer

Thanks for reaching out to us. I've never seen a roller with the wheels mounted in such a way. However, I think the 81-052 is worth considering. There's a chance it won't clear the track once it's installed in the bottom rail of the door and the wheels may not go up as far into the roller housing to clear the track. However, our roller has a spring to hold the wheels down but can be pushed up for the 1/4" clearance you're looking for.