Need help replacing tilt latches

Question

Using the window sticker from the American craftsman window it is a model number 52?80 508 ? WHT. We are looking to purchase six pair of tilt latches. We need two for right now,but we're going to get some for spares this would be for left and rights.They do not have the little tab sticking up on top,just the slide finger. The length of the unit without the slide lock is 2 3/8 inches with the lock 2 11/16 inches. The width is 11/16, thickness is 3/8 of an inch,and these are the ones that have the two ears that stick out on the locking side. Thank you for your help, inform us how we might be able to go forward. Thank you, Drew.

Jasmine · Accepted Answer

Thanks for posting. Based on your measurements, I believe we have replacement tilt latches that will work for your window, however, I will need to see a photo of the original hardware to make the best part recommendation. The photos along with the measurements will ensure be are making the best possible recommendation.

I am especially looking to see photos of the top and side of the latches. So you will need to remove them from the window.