Need replacement lock

Question

It's a double latch holes are 9 7/8  1/2 inch width.   I see one similar on your site but it says face is 3/4 and mine is 1/2.  Shows pat no 6.264.170.  5820.170

Emily · Accepted Answer

Hello there!

I recommend you take a look at our 82-239 mortise lock. This has 9-7/8" installation hole center spacing but is 9/16" wide which is close to your 1/2". Look this part over and see if you think you could use this part for your application despite this difference.

Alternate image for 82-239