Odd Screen Door Wheel Replacement

A quick learner from USA says:
I called a Swisco.com rep on the phone about the odd size, terribly constructed screen door wheels that I would like to replace.

Attached are photos of the wheel and dimensions.

The wheels are supporting 11' high by 60" wide screen doors that were manufactured using Schuco extrusions.

The base of the housing can be longer than 1 ?" but cannot be much wider than ?". I might be able to use ΒΌ" but no more is preferable. There is not much wiggle room for more height than 1 ?".

The location is close enough to the ocean that salt corrosion is an issue.

If there is a spring loaded option it would be better at keeping the doors on the track.

I have also attached a photo of the house that the screen doors are a part of.
Thumbnail of the uploaded file named capture 0.jpeg
Thumbnail of the uploaded file named Capture 4.JPG
Thumbnail of the uploaded file named Capture 2.JPG
Thumbnail of the uploaded file named Capture 3.JPG
Thumbnail of the uploaded file named Capture 1.JPG
Profile picture of Emily
Emily from SWISCO responded:

Hello!

We don't have an exact match for this but I'm going to have one of our senior experts take a look and see if they could recommend a replacement for you. We'll reach out as soon as more information is available. 

Thank you!

Profile picture of Dave Sr.
Dave Sr. from SWISCO responded:

Unfortunately, your roller was discontinued and is no longer available. However, take a look at our 84-074B spring loaded roller. I took one out of stock to check the height with the adjustment screw removed. When I squeezed the wheel up into the housing the height was 1-1/4" tall.

It has a spring in the housing to keep the roller on the track, but I found the spring has some tension to it. You might want to remove it. Anyway, if the height will work for you this roller has two holes in the upper housing which you could use to mount the roller in the screen door.  I can't promise this will work but take a look and see what you think.

A quick learner from USA says:

thank you Dave Sr.

I will order a couple to try.

Sincerely appreciate you and the staff at Swisco working to find a solution.

Sincerely,Steve

Profile picture of Dave Sr.
Dave Sr. from SWISCO responded:

We appreciate your business, Steve, and we're always happy to help. Good luck with the repair!

Reply to Thread
Use this form to ask a follow-up question or to share your experience regarding this subject.
(your email address will be kept private and is only used to inform you when a response has been made)
Current wait time is 3-4 business days
We promise that one of our experts will personally get back to you as soon as they are able. Thank you very much for your patience and understanding. If your inquiry is time-sensitive, please feel free to reach us at (888) 991-1929 or at help@swisco.com.