Old metal sliding patio door rollers

Question

Can you please identify the matching old metal sliding patio door roller?

Door doesn't have a screw to hold the roller (only one hole for adjustment screw on the door; no second screw or hole to attach the roller).

To take out the old roller, I removed the sliding door, removed bottom panel of the door and slide out the roller from the bottom panel.

Attaching some pictures of the roller I removed. This is at my rental property where its hard to slide the door and I am looking forward to replace the roller. I'm pretty handy person.

Emily · Accepted Answer

Thank you for reaching out to us.Our closest match is the 81-154 roller assembly. The top screw in this roller housing is the adjustment screw, similar to yours. We believe that the elongated cutout at the top of the housing should fit into the glass door frame to help secure the roller in place. I don't think you'll need the installation hole on the 81-154 housing. Please review the dimensions below to determine if you can adapt this for your repair.

Alternate image for 81-154