Please see the attached photos and advise if you can identify and provide information to quote this door handle. Lock on top pushes in and pulls up and is broken and the metal latch that hooks inward on frame is broken.Please see the attached sliding door lock and advise if you have a sub It might be a Hillmaster brand – DIST 5350 will ship to CA 91367
PRODUCT ID AND RFQ B951452
Quick Learner
May 23, 2025 11:18 am
5 user uploaded images
4 Replies
Casey from SWISCO
May 28, 2025 3:14 pm
Hello,
We'd be happy to look into this for you, but we'll need you to confirm the exact distance between the center of the installation holes of your handle set, which looks close to 4-1/2". We'll also need to see photos of the mortise lock in the center of the door that your handles engage with. Thank you!
Quick Learner
May 29, 2025 6:17 pm
per the salesman -
The mounting holes look to be 4.875” on center but could be 4.9375. If lock plates are same size or larger could a new lock be hung from top hole and drill a second new hole higher / lower to accommodate size difference. The locking clamp must face inward to the unit to fit in channel, no way to modify this.
The mounting holes look to be 4.875” on center but could be 4.9375. If lock plates are same size or larger could a new lock be hung from top hole and drill a second new hole higher / lower to accommodate size difference. The locking clamp must face inward to the unit to fit in channel, no way to modify this.
2 user uploaded images
Casey from SWISCO
May 30, 2025 8:23 am
Unfortunately, we do not carry a replacement clamp-style handle set that matches the orientation of the latch shown in your photos. I'm sorry we won't be able to assist with this repair, but please let us know if you have any other hardware questions.