Part needed

Question

4"long, small end 1/4 diameter, large end 3/8 diameter. Need 3 of these plus springs& clips.

Paul · Accepted Answer

Hello,

Unfortunately, we were unable to find a match for your spring-loaded pin. We do have a 5/16" spring-loaded pin, the 21-041, that you might be able to use. The tip is 1/4" and the base is 5/16".

With the 21-151 nylinder installed in the door pin cutouts, it would reduce the pin thickness in your bifold door. Take a look and see if you might be able to adapt these parts to work for you.