Peachtree Sliding Patio Door Replacement Rollers

Question

Hi. Need to replace the rollers on an older (1999) Peachtree sliding patio door. It appears as though most sliding doors have 2 screws on the bottom sides, 1 to adjust the roller height and 1 that holds the roller in place. My door appears to have neither. Is there a standard replacement part or is more info needed to be able to identify the rollers?

Casey · Accepted Answer

Hello,

Unfortunately, there is no standard replacement roller. Peachtree is especially difficult because they've been out of business for quite some time and most of their hardware no longer exists.

There's a chance that we may still be able to help but we'll need to see your original roller uninstalled to confirm. While most doors have two screws on the bottom side corners of the door frame, there are other possibilities; sometimes the installation screws are on the bottom, for instance. If that's the case then you'll have to remove the door completely from the frame to check. A good indicator would be for the adjustment screw to be on the face of the door at the bottom. Thank you.