Peachtree citadel sliding screen 1 1/2" roller

Need 4 , has 1 1/2" roller

For a peachtree citadel sliding screen door.

Often with these unavailable rollers, the only solution is to drill a hole in each end of the screen and insert a roller and screen bolt. If adjustment is required, you can usually just angle the drill while running it to widen the hole. I have had very good results with this method, often better than the original tiny bearingless plastic rollers. I would shove the screen tight against the jamb, have someone else measure the gap under each end and use this measurement to gauge the height difference the holes. One of the circled axles in this picture of 81-266 should work. You may need washers if the roller is loose.