Pin replacement

A landlord from florida says:
Hi, Here are the dimensions for the pins that we need. They are 4' long, the
top part of the shaft has a 3/16" diameter, the lower part of the shaft has
a 3/8" diameter. The metal dome on bottom has a 7/8" diameter. The top plastic
part has a 3/4" diameter. Photos attached.
Thumbnail of the uploaded file named IMG_7101.jpg
Thumbnail of the uploaded file named IMG_7102.jpg
Thumbnail of the uploaded file named IMG_7103.jpg
Profile picture of Paul
Paul from SWISCO responded:

I believe you may have a Finestra bifold door if I am correct. Have a look at our 21-110 pin cap that fits on a pin where the top tip is ground down to 1/4". Please also have a look at our 21-018 bifold door top pivot. We do not offer the locking metal dome, but our 21-156 push nut could still do the trick. View each part suggested and let us know if any other questions come up. 

Reply to Thread
Use this form to ask a follow-up question or to share your experience regarding this subject.
(your email address will be kept private and is only used to inform you when a response has been made)