Pivot Bar for Ply Gem MW Pro Classic Series - Double Hung windows

Question

Do you stock 'pivot bars' for Subject windows? I have contacted PlyGem and their P/N is 251607, but they do not sell to the public. The pivot bar is about 1.5" long and about a 1/4" wide with two mounting holes. The number on this bar is 23111, not sure if that number is relevant. This would be a replacement for the bottom sash.

In the attached photo I left one of the screws in the pivot bar in hopes it might help with identification.

Any help would be greatly appreciated.

Thanks,

Ed

In the attached photo I left one of the screws in the pivot bar in hopes it might help with identification.

Any help would be greatly appreciated.

Thanks,

Ed

Tom · Accepted Answer

Hello, Ed. As a matter of fact, I think we do have a match for this. I think you could use either our 26-360 or 26-415. The dimensions will be the main factor, so make sure to carefully review what we show for reach product to confirm. Take special note of the hole positions. Only one hole needs to match up with the one your old pivot bar uses.