Pivot bar broke; need replacement
A home owner from Maryland says:
September 30, 2018
Plastic body is 2.275? long
Overall length is 2.7? long
Overall height .41? tall
Pin that goes into pivot shoe is 5mm tall, 8mm wide, 10mm sticks out of bar
Window is from approximately year 2000
This information was inside the window sill on a sticker:
31.500 61.500 2 705338 VI3088
6/6 H
31 Master aluminum products
97 stocking program 4/97
Overall length is 2.7? long
Overall height .41? tall
Pin that goes into pivot shoe is 5mm tall, 8mm wide, 10mm sticks out of bar
Window is from approximately year 2000
This information was inside the window sill on a sticker:
31.500 61.500 2 705338 VI3088
6/6 H
31 Master aluminum products
97 stocking program 4/97



![]() |
Paul from SWISCO responded:
October 9, 2018
Let's start off with your pivot shoe. Our 15-175 should be able to replace your current one. These are used with a Series 152 coil spring. Take a look at the coil and see if there are similarities between yours and ours. The nylon pivot bar you have is no longer available. We now offer the 26-379 as a substitute. Compare the measurements between both piece and see how they match up. |