Pivot/Tilt Pin Replacement for Sierra Pacific windows
A handy person from Colorado says:
April 6, 2021
I'm looking for replacement pivot pins for Sierra Pacific windows. The original pins are approximately 1.25" long, 3/8" wide and 1/8" thick with a pin that's 3/4" total height with a head that's about 1/4" x 1/8." There are two 1/8" diameter mounting holes that are spaced about 3/8" apart.
Bob from SWISCO responded:
April 8, 2021
I've seen Sierra windows use our 26-398 or 26-405, as well as maybe our 26-444, but without seeing an undamaged version out of the window I have no idea if these are what you need. Compare them to your old pivot bars and see what you think.
A handy person from Colorado says:
April 8, 2021
Hi Bob, I should have provided a picture. What I have is an ell shaped pin and not a bar. See the attached pic that goes along with the dimensions I provided previously. Do you have anything like this?
-Chris
Casey from SWISCO responded:
April 9, 2021
The picture helps a lot. Take a look and compare the specifications of our 26-402 side mount pivot bar to yours. Thanks for posting!
A quick learner from Jemez Springs, NM says:
September 12, 2022
Hi Chris, I also have Sierra Pacific windows, the same pivot pin broke for me, I have the same dimensions. Did the part 26-402 work for you? Thanks