Plastic window part : SWISCO.com

Landlord from Pittsburgh PA

Sep 17, 2026 10:44 am

This item sits on top of window and holds window into each side frame. It can be released so window can tip inwards so outer glass can be cleaned. I need about 10. I may have already submitted this request. I called Customer Service and nothing would connect. Thank you.

1 user uploaded image

4 Replies

Tom from SWISCO

Sep 22, 2026 11:01 am

Hello! Thanks for contacting us. This part is called a tilt latch. We sell a huge selection, but in order to narrow it down I'll need you to measure the distance between the two installation screws and tell me what you get. Make sure to only measure from the center of each hole, not their edges.

Once I have that, I'll check our inventory for a possible match.

Landlord from Pittsburgh PA

Sep 23, 2026 5:08 pm

Thank you. Distance between those holes is 2 inches.
Overall msmts: 3 inches by 1 inch.
Wonderful! Thanx again. Elena

Tom from SWISCO

Sep 24, 2026 8:58 am

Great, I appreciate the measurements. So, we have two latches that I think are viable. See our 26-337 and 26-344. Both of these have a 2" hole spacing and both are 3" long. Where they differ is in the hole offset (how far the front hole is from the edge of the housing) and width. Neither is 1" wide like yours, but they aren't very far off.

I recommend reviewing our dimensions and double checking yours just to be safe. One of these may very well be a winner.

Detail of 26-337

Dimensions for 26-344