Prime Line: window tilt latch or anything with same measurements

Home Owner from Tennessee

White vinyl / Single hung for tilting inward / Surface mounted / Spring loaded

Screw holes: 2" spacing from center of screw to center of screw

Base Length: 2+7/8" Base Width: 7/8"

Center of hole (closest to end with latch) to end of base:: 5/8"

Pair: right and left needed

Thank you...

4 Replies
Tom
Tom from SWISCO
SWISCO
Expert

Thanks for reaching out to us. It's very difficult to say for sure what you need without seeing photos of the part in question, but going off of size alone, we don't sell anything that matches.

Two possibilities are our 26-337 or 26-344. Both have a 2" hole center spacing, but the other measurements (such as width and backset) differ. 

You can start by looking these over, but ultimately a photo would put me in a much better position to gauge what you have.

Home Owner from Tennessee
Thank you for responding so quickly. This information is very helpful. Have had difficulty getting the exact measurements. Now just trying to get as close as possible.
Tom
Tom from SWISCO
SWISCO
Expert

I understand. We're here to help if you are able to get a photo or more precise measurements. Just let me know!

Reply to Thread
Current Photos:
Related Products
Related Videos
Related Guides