Replacement part for shower door
Quick Learner from Rapid City, SD
Jul 19, 2015 10:54 am
The plastic spacer piece was brittle and snapped where it screws into the shower
12 Replies
Dave Sr. from SWISCO
Jul 22, 2015 11:58 am
Your bottom guide does not look familiar. Do you know the manufacturer of the door? That could help us identify the part you need. Also, how thick is your shower door glass?
Quick Learner from Rapid City
Jul 22, 2015 1:54 pm
I don't know the brand. The only markings I can find is on the glass doors themselves, which is:
Unitex
Tempered
ANSI Z97.1-1984
16 CFR 1201 11
SGCC-2575 1/4U
The doors are 1/4" thick. I've attached a picture of the plastic piece next to my tape.
Unitex
Tempered
ANSI Z97.1-1984
16 CFR 1201 11
SGCC-2575 1/4U
The doors are 1/4" thick. I've attached a picture of the plastic piece next to my tape.
Dave Sr. from SWISCO
Jul 28, 2015 2:12 pm
Thanks! We don't have an exact match for this guide, but we are currently working on bringing in a possible replacement and will let you know when it becomes available. Thanks for bearing with us.
Tom from SWISCO
Aug 6, 2015 10:23 am
Hello there. Please see our new 10-218 and let me know how well this could work as a replacement.
Quick Learner from Chicago, ILL
Jul 12, 2023 11:17 am
Greetings,
I just purchased a home, and the shower hardware needs to be replaced. Unfortunately, the contractor removed the hardware without writing down the ID numbers. I found numbers on the glass. I hope in providing these it will assist in finding the bottom track/guide system and rollers to install the glass. Can you please assist to identify the right hardware and where to purchase? Please see the numbers below that can be found on the glass and pictures I have provided. Thank you!
16 CFR 1201 ? II
ANSIZ97. 1 - 2004
3/8UA SGCC 3962
I just purchased a home, and the shower hardware needs to be replaced. Unfortunately, the contractor removed the hardware without writing down the ID numbers. I found numbers on the glass. I hope in providing these it will assist in finding the bottom track/guide system and rollers to install the glass. Can you please assist to identify the right hardware and where to purchase? Please see the numbers below that can be found on the glass and pictures I have provided. Thank you!
16 CFR 1201 ? II
ANSIZ97. 1 - 2004
3/8UA SGCC 3962
5 user uploaded images
Tom from SWISCO
Jul 12, 2023 2:03 pm
Unfortunately, we do not sell a replacement roller that matches this design. I've honestly never seen this before, so I'm not sure what it may be. Your best bet at this stage is to try to find out who made the door and to contact them directly.
All I can tell you with confidence is that the stamp on the glass is not relevant to the hardware. It only tells you who made the glass, not the door itself.
I am sorry that we can't be of more help.
Home Owner from NJ
Jul 17, 2023 5:14 pm
I have the same door! I also need to replace the bottom rail and glider hardware. Any suggestions?
1 user uploaded image
Tom from SWISCO
Jul 18, 2023 8:55 am
I'm afraid that we don't sell bottom rails for shower doors. As above, I think your best option for this project is to try to get in touch with the original manufacturer.
Home Owner from Pennsylvania
Oct 18, 2023 11:35 am
To the quick learner from Chicago, and the homeowner from NJ, did you ever have any luck finding the part? I too have the exact same door, and the same issue. Knowing the previous owner, I have a feeling it was a cheap door purchased from one of the big box stores. But curious what you were able to find out. Thanks.
Quick Learner from Florida
Oct 22, 2023 9:13 am
I'm looking for this self adhesive shower seal, the sticky side is flat. Thank you
1 user uploaded image
Tom from SWISCO
Oct 24, 2023 8:06 am
Unfortunately, we don't sell adhesive shower door seal of any kind. I am very sorry for the inconvenience.
Related Products
