Replacement patio screen wheel
A contractor from wilmington nc says:
September 16, 2011
I am trying to figure out if your part #84-074 will work for replacing the wheel shown in the photo. We have not had any luck with securing them from the mfg, or local dealers. Ours are held in by a removable pin and the end of the wheel housing (not shown in your ad) needs to match ours for ease of installation. thanks for your help


![]() |
Mike from SWISCO responded:
September 16, 2011
Good Afternoon,
Yes, it does the 84-074 would work as a replacement. The removable rivet you are using should have been locked in. You will find a screw holding the rest of the housing to the patio screen frame. |
A contractor from Wilmington NC says:
September 20, 2011
Can u verify that the arm shape at the opposite end of the wall is the same? The hole for the pin shown appears to be 3/16" or 7/32". Thanks Dennis
![]() |
Mike from SWISCO responded:
September 20, 2011
Dennis, I'm not exactly sure what you're asking.
But if this yelps, the 84-074 Screen Door Roller comes in one piece, the top portion being riveted with the spring. It also comes with the adjust screw and collar. |