Replacement shower sweep
Quick Learner from basking ridge
Apr 27, 2018 4:02 pm
Even though hack saw will give me the required length. The screw hole distance must be 14 inches. Can you please confirm the distance between the holes? Thanks
3 Replies
Quick Learner from United States
Apr 27, 2018 4:14 pm
Hi
Attached are the pics of shower sweep. I want to replace it with a new one.
rough length is 18.5 inches.
distance between 2 screws = 14 inches
there is 1 inch notch, so longer length is 19.2 inches
flushed part length is 18.2 inches.
drip rail is glued to the back of shower sweep, so when shower door is closed it sticks inside the shower.
please let me know if i can replace it with any of the part you have? Thanks.
Attached are the pics of shower sweep. I want to replace it with a new one.
rough length is 18.5 inches.
distance between 2 screws = 14 inches
there is 1 inch notch, so longer length is 19.2 inches
flushed part length is 18.2 inches.
drip rail is glued to the back of shower sweep, so when shower door is closed it sticks inside the shower.
please let me know if i can replace it with any of the part you have? Thanks.
1 user uploaded image
Tom from SWISCO
May 2, 2018 9:19 am
I'm afraid none of our drip rails match those specifications, exactly. You would likely need to drill holes in the new drip rail to get it to install. You could also use double stick tape, available at any local hardware store.
