Replacement wheel for Marvin sliding screen door

Quick Learner from North Tonawanda NY 14120
Ii have Marvin French doors installed in 1991-Marvin jason parts for this discontinued item. The wheels ( on top & bottom of screen) have broken off - the wheel has a metal tab- I can send another pic-that attaches to door by a little screw . Do you have these replacement wheels with the metal tab & screw? Marvin has nothing to offer me & suggested I contact you- thank you
1 user uploaded image
6 Replies
Tom
Tom from SWISCO
SWISCO
Expert

I'm afraid I don't recognize this roller. we may have something that can replace it, but I would need to see this assembly removed from the door entirely so that I can research it. Specifically, I need a clear picture of the side, top, and rear. Dimensions would also be a big help if possible.

Home Owner from North Tonawanda NY 14120
Here is a pic / part of the metal strip is broken off- the screw would go thu the end of strip to secure to screen door the wheel is 2 inch diameter- is there any thing you can recommend as a replacement? Thanks
1 user uploaded image
Dave Sr.
Dave Sr. from SWISCO
SWISCO
Expert

I've seen this roller a few years ago. It's not made anymore, but we do have a possible solution.

I believe you need to remove the corner from you door and see if the dimensions match up to our 95-020. I don't believe the shape matches up to the original corner, but it may still fit in the screen door frame. If it does then you can additionally need to use one of the related corners like the 84-016

Home Owner from North Tonawanda NY 14120
OMG- too involved for me! I/ve never had any luck replacing screen once the rubber strip is removed. Im wonderring if this 84-016 can somehow be used- is it a 1 inch diameter wheel? Thank you!
Dave Sr.
Dave Sr. from SWISCO
SWISCO
Expert

The 84-016 can be used, but only if you replace the corner at the same time. I don't think it will be compatible with your setup by itself.

Reply to Thread
Current Photos:
Related Products
Related Videos