Replacing a therm roller

Question

Please.see pictures (attached) A Therm patio door roller. I will need two of these. Please email me back with what to order.
Thanks

The housing had the typical screw that passed through a hole to connect to the roller. The door as I remember it had a slot on each side for the center point of the roller that protrudes outside of the encasement to slide in on each side.
This A Therm roller is at least 25-30 years old.
Hope this helps.

Took off the door again and captured as many pics of housing and roller. Hope this is sufficient to determine what roller will be needed.

Casey · Accepted Answer

Hello,

We'd be happy to help but it looks like you have only removed the inner housing of your roller so far. We would also need to see the outer housing removed from the door, as well as have you write out the exact height, width, and wheel diameter, to compare to our inventory. Thank you!