Roller Slide Bracket For Kitchen Cabinet Drawer

Home Owner from 19707

Aug 27, 2023 2:58 pm

I need a mounting bracket with a 3/8" peg for insertion into a drilled hole in the cabinet rear panel. The rail is nominal 1" x 3/8" x 22.5" and is stamped with the logo G*. The manufacturer is Grass. My cabinet was installed new in 1986 when my house was built.

2 user uploaded images

6 Replies

Bob from SWISCO

Aug 27, 2023 5:22 pm

Thanks for posting. See our 32-061 21-5/8" long drawer slides, as well as the 32-119 Track brackets. See if you could adapt this setup to your drawer. Note that these replacements sockets must be mounted with screws to the back of the cabinet. Let me know what you think.

Home Owner from DE

Aug 31, 2023 5:24 pm

Will the Grass Adapter Bracket Pair fit my existing rail?

Bob from SWISCO

Sep 1, 2023 10:08 am

I think it will, yes. Your original bracket is the old Merillat brand drawer socket, which is no longer made. However I've personally used the 32-119 to replace it many times in the past and it has a high success rate. As long as the opening that takes the track is the same size as ours then it should work perfectly well.

Detail of 32-119

Home Owner from DE

Sep 1, 2023 11:38 am

Dear Bob,

Thanks for the help!

I want to order the brackets and the fasteners together. Please send the product code for the fasteners.

Dave

Bob from SWISCO

Sep 1, 2023 2:11 pm

Sure, I like to use the 33-088, but keep in mind that the 5/8" length may not be ideal for the back wall of your cabinet. You might have to gauge that for yourself to make sure you have something that works adequately with the cabinet itself. Otherwise the #6 gauge should be fine.