Roller for mirrored closet doors

A quick learner from Corona, CA says:
I need to replace rollers on my mirrored closet doors which are pretty old. The product, Mirrored Closet Door Roller, Round Product Code: 23-042, seems to be the closest to it. The dimensions are the same except in length. The one pictured online is 3" and mine is 3.5" but because the screw goes through it I'm assuming it should work. The screw on mine is much longer but again I think it should work. There is nothing written on it and I did not remove one. I just took pictures of the front and side views.

Thank you for reviewing it and providing feedback to me. Arlene
User submitted photos of mirror closet door hardware.
Profile picture of Paul
Paul from SWISCO responded:
I agree, the 23-042 appears to be our best match. Because you have an adjusting screw, the difference in height shouldn't matter too much. Just make sure your existing roller also has a rounded, bulb-shaped spine, like our 23-042, or else ours won't fit in that bracket. If your roller has a "T" shaped spine, see our 23-074 instead.
A quick learner from Corona says:
Thank you for your response. I appreciate your bringing to my attention the spine design. I hadn't considered that. Mine seems to be squarish so I'll order the T spine, 23-074.

I appreciate your help.
Arlene B.
Reply to Thread
Use this form to ask a follow-up question or to share your experience regarding this subject.
(your email address will be kept private and is only used to inform you when a response has been made)