Roller replacement

Question

Hi ,
The part # 81-261.
Please advise the distances between from CENTER of the adjustment screw ( lower) to the CENTER of hole (top) - where is the screw attached from the side of slice door frame . How far apart is it?
I measured my is
7 /16 of an inch.

Thanks!
Son.

Dave Sr. · Accepted Answer

I don't believe our 81-261 is the roller you need. It looks like you show a flat head adjustment screw in your photo, while the adjustment screw on the the 81-261 is a pan head type screw. I did spend some time looking at our other rollers, but could not come up with one with a hole spacing of 7/16", like you show. The ones we carry are all closer to 5/8" on centers. You will need to remove the roller from your door and send us some photos of it by itself, along with some dimensions, so we try to find a match.