Searching for 21301 bst

Quick Learner
Stamped code 21301 bst
2 user uploaded images
7 Replies
Tom
Tom from SWISCO
SWISCO
Expert

Your balance appears to match our Series 350 at first glance. This assembly comes with our 19-002 top and 15-004 bottom nylon fitting, so as long as those match up then it should work well.

the only thing I'm not sure about is the stamp. 2130 would be normal, but 21301 is quite odd. May I see a photo of the stamp in question? Maybe seeing how those codes are printed would allow me to verify the proper option. Can you also tell me the precise weight of the sash, down to the ounce?

Home Owner from Kingsburg Ca
See attached

I will order from you site just confirm order info for me
1 user uploaded image
Home Owner from Kingsburg Ca
4 7/8 ounces
Tom
Tom from SWISCO
SWISCO
Expert

Thank you. That is certainly an odd stamp. I'm also not sure that weight is accurate. Can you confirm that? Please note that I'm asking for the weight of the sash, not the balance. The sash is the glass panel that the balances support. Knowing its weight will allow me to properly calculate how strong the balance spring ought to be.

Home Owner from Kingsburg Ca
I have no way to weigh the sash

I have 2 window sashes that have a are of 23 x 38
These have the 21301 stamp with a weight of 16.2 each
And
2 window sashes that are 23 x27 with the stamp 2130 with a weight of 11.4



Tom
Tom from SWISCO
SWISCO
Expert

If your 22" balance is used on a sash weighing 16.2 pounds, then you should use the 2140 stamp option. This carries 15 through 23 pounds, so 16.2 should be perfectly fine.

I'm afraid sash size is not enough for me to accurately recommend a weight option. If you cannot get the exact weight of your sash, then I cannot make a suggestion.

Reply to Thread
Current Photos: