Searching for Roto P4600

Question

I need a replacement for the assembly, the inter cog has broken teeth. It is a Roto P4600 (see picture). The cut in the window is 5inches long and 0.5inches high. The width of the portion with the screws is just shy of 4 3/8 inches (about 4 5/15 inches). The spacing for the screws is 9/16 inch on each side. I need the rubber gasket as well that goes between the metal and the wood.
Thanks! Darryl

Bob · Accepted Answer

This looks like an older version of the ROTO 39-091 and 39-092. Unfortunately, ROTO has discontinued a lot of the hardware associated with these operators over the years, including the bracket arms and crank handles; soon even the operators themselves will no longer be around. I apologize for any inconvenience.