Dave Sr. from SWISCO responded:
February 5, 2018
Sure, I'd be happy to help. First, remove the door and lay it on a flat surface. You will need to remove both bottom end screws (you might need WD-40 to help loosen them up). Then, with a block of wood and hammer, gently knock off the bottom rail only just enough to allow you to slide off the old guide and slide the new guide in its place. You might want to take the door to a local glass shop in your area to do the work. You don't want to damage the glass or frame. It's not a hard job, but it could get expensive if the glass breaks.
|