Single Hung Window Hardware Replacement : SWISCO.com

Landlord from Baltimore, Maryland

May 6, 2025 11:41 am

I’m looking to replace several of my single-hung window tilt latches and cam locks. I’ve uploaded two photos showing the parts installed. The cam lock is intact but appears worn.
I don’t see any brand markings or part numbers on the hardware. I would appreciate your help identifying exact or compatible replacements. Please let me know if you require additional photos, measurements, or details so I can promptly provide them.

2 user uploaded images

4 Replies

Casey from SWISCO

May 12, 2025 12:29 pm

Hello,

We'd be happy to look into this for you but we'll need a bit more information to get started. If you could write out the exact distance between the center of the mounting holes in your tilt latch and sash lock, we can go from there. Thank you!

Landlord from Baltimore, Maryland

May 22, 2025 4:54 pm

For the tilt latch:

Hole-to-hole measurement: 2-1/8”

Overall width: approx. 1-3/8”

Marking on back: 48 R; PAT# 4,001,475

For the cam lock:

Part number stamped: 1872 2

Appears to be metal

Fits into a single-hung window, locking into the top sash

Hole-to-hole measurement: 2-1/8”

Casey from SWISCO

May 23, 2025 8:27 am

Thanks for getting back to us. Take a look at the 26-120 and 26-121 tilt latches below.

Measurements of 26-121

Unforutnately, we do not carry a match for your sash lock with 2-1/8" hole spacing. The 90-161 and 90-077C come to mind but the hole spacing is 2-1/16" on center. Take a look and see what you think.

Detail of 90-161

Dimensions for 90-077C