Sliding Glass Door Lock and Handle

Question

Hello: I need a sliding glass door replacement lock, and perhaps I need the lock plus handles kit. There are three bolts to the door handle?the highest and lowest being 4" apart. The metal part affixing was he handle to the door is 7 " long. The door is about 1-1/2" wide. As I was unscrewing the locking device, it accidentally fell inside the door frame.
Do you have any suggestions for what I need.

Thank you.

Bob · Accepted Answer

Thanks for posting. If your original handle set is undamaged you could reuse it; but otherwise, see our 82-035. Go over the dimensions to confirm it matches. Your mortise lock was likely our 82-218. It's a very common accident for these to fall down into the door during removal and replacement. The video below details how to install them. Keep in mind that it looks to my eye that there's some damage around the hole in the door where the top of the lock is fastened. If this is an issue, you may need a professional to repair the mortise hole.