Sliding Glass door handle.

Contractor from Roswell, Georgia
Sliding Glass door handle. Opening is 8" Tall for hardware.
 
3 user uploaded images
8 Replies
Casey
Casey from SWISCO
SWISCO
Expert

Hello,

We carry a few handle sets similar to yours but the locking hook is also an important factor. If you could show us the placement of the cutout and orientation of the latch, that would help us determine if one of our replacements could work for your repair. Thank you! 

Contractor from Roswell, Georgia
I think you have it ! It looks like the one on your email.
Also, do you have an exterior Handle that we can mount on both sides of door to make it easier to open and close, one that maybe goes with the other or I just need one that will work the best?
Thank You !!!
Jon
2 user uploaded images
Casey
Casey from SWISCO
SWISCO
Expert

Thanks for getting back to us. The style of your handle set resembles the 82-008 patio door handle. However, the placement of your locking hook looks closer to our 82-002. I would suggest reviewing the specifications of both products and to determine if one of them could work for your application. 

Alternate image for 82-008
Alternate image for 82-008

Alternate image for 82-002
Alternate image for 82-002

Keep in mind that we can't make any guarantees since the large gap in the door indicates that this was not the original hardware the door came with but something that was modified down the line. 

As for pull handles, neither option is able to use a pull on the outside of the door but both options are used with the 88-009 or 88-002 on the inside of the door. 

Detail of 88-009
Detail of 88-009

Alternate image for 88-002
Alternate image for 88-002

Contractor from Roswell, Georgia
Thank you very Much !!!
On the extra handle.
Do you sell a handle that we can mount on the outside that will work even if its not exactly designed for this exact model?
Thanks again,
Jon
 
Dave Sr.
Dave Sr. from SWISCO
SWISCO
Expert

Casey is correct that, unfortunately, these types of handle sets are simply not designed to accommodate a pull handle on the outside. We apologize for the inconvenience. 

Contractor from Roswell, Georgia
Ok attached is a new pic of the door Im trying to get replace lock for. The other pics I sent you was a door thats upstairs that still has a lock on it and Im not sure this doodr and that door are identical. The opening on this door is exactly 8" and you can see the latch in the pic. Since most of these locks are 6 5/8" - is the a plate or something to make the smaller locks work in this 8" opening?  Thank you very Much for your time !!! Jon
2 user uploaded images
Dave Sr.
Dave Sr. from SWISCO
SWISCO
Expert

It looks like different hardware was originally used for both doors since the opening is larger than the handle installed in your original photos. Unfortunately, we have no way of knowing what was originally used since we base our recommendations on photos of the hardware currently installed. If you think you can install the same kind of handle used in the second door, you'll need to check with a local hardware store to look for a type of shim or cover for the rest of the exposed opening in the door. 

Reply to Thread
Current Photos:
Related Products
Related Videos
Related Guides