Sliding patio door roller replacement

Question

My door uses a double metal wheel assembly. The height is 1 1/8", width is 5/8", with a roller diameter of 1 1/2". When installed, there are two access holes from each side of the door. The upper screw holds the roller assembly to the door and the lower is an access hole for the height adjustment of the roller assembly. Which part do I need? It looks like maybe 81-030? Thanks.

Bob · Accepted Answer

Hello there. The 81-095 Roller looks closest to me at first glance, as it has the same 1-1/8" housing height and 1-1/2" wheel diameter. The housing however is 3/4" wide, so double-check your measurements to ensure this matches. Let me know what you find.

Alternate image for 81-095