I am looking for weather stripping for my patio door. The house was built in 1989. The glass is Herculine KppG. The pile weather stripping around the door (sides and along the top) slides into a vinyl supporting piece. The backside of those pieces snap into grooves in the wood framing. These pieces are held in place by screws. The backing of the pile weather strip is approximately 1/4 in. and slides into grooves along the outside of the vinyl pieces. The pile weather strip on the bottom appears to be the same but supported by a different vinyl piece. This piece runs along the bottom rail. The side jam weather strip is vinyl and snaps into a groove in the woodwork. I would say the base is 1/4" and the sealing part of it would also be 1/4". The door height is approximately 77 5/8" and the width is approximately 35 1/2". Any help is greatly appreciated.
Tim R.
Sliding patio door weather stripping
Home Owner from Lexington NE 68850
Jul 6, 2022 4:14 pm
4 user uploaded images
2 Replies
Tom from SWISCO
Jul 11, 2022 12:14 pm
We sell many different types of wool pile, but nothing in 1/4". I would triple check that just to be sure. Wool pile sizes tend to be very very specific, with many of them being only 1/32" or so off from 1/4". It is likely that you have one of these but you will need a more precise measurement.
In the meantime you can see our full selection here.