Swisco replacement parts for Simonton Vinyl Dimension 1

Home Owner from Pennsylvannia

I would be grateful if you could provide advice for purchasing Swisco replacement window parts for my 18-year-old Simonton Dimension 1 model single hung windows.

Windows all the same size - 35" x 59" single hung tilt out vinyl windows. 11 of this style require replacement parts.

Sun damaged the plastic parts connected to the spring coil balance and released the springs on some of the windows.

I believe parts needed are 2 new spring coil balances for each window and 2 plastic coil spring covers if they do not come with the coil spring balances. Each coil spring balance appears to have 2 small coil springs inside the plastic cover.

Not sure if the pivots that hold one end of the spring are part of the spring balance unit or need to be purchased separately? Will also need 2 each for 11 windows.

4 windows need tilt out plastic spring latches damaged from sun exposure damage. 4 Left and 4 Right side latches are required.

Pictures of the sun damaged parts are below. Also a poor picture of the window barcode label. Unable to remove without label destruction. I was able to capture all the numbers from the window barcode label shown below.

Window #

2584769/05

Unit 35 5000 59 5000

DMSH

G1 31 5625 27. O65

Pace Supply Lansdale

Simonton Windows

0003030750

00171

3/03/00

Thanks for your help.

2 Replies
Tom
Tom from SWISCO
SWISCO
Expert

Thanks for posting. For your tilt latches, see our 26-243 and 26-244 to start out. I think these will match well, but you may want to compare dimensions just to be sure.

As for the coil balance hardware, can you first tell me the thickness of the spring? Can you also show me a picture of the pivot shoe?

Reply to Thread
Current Photos:
Related Products
Related Videos
Related Guides