Toro Aluminum roller assembly

A quick learner from Minnesota says:

I have a screen door manufactured by Toro Aluminum in Canada. My screen door itself is in a condo in Mexico, and the only Toro repair rep is in Toronto and will only deliver locally in Toronto and accepts cash only. I'm hoping you will have a suitable replacement as that would be cheaper than flying to Toronto for a $3 part. Anyway, the nylon wheel is about 1 1/8" (3 cm) in diameter. I was not smart enough to measure the width of the wheel when I was there but the retangular-ish part is 1 3/8" x 1". The distance to the top of the arc on the spring is 1 3/4" from the top of the rectangle. The roller seems to be held in to the door by friction/the spring, as I was able to remove it by rotating it. The picture is the one in good shape, relatively speaking. The others all have cracked wheels.

I'm in Minnesota at the moment, but going back to Mexico in early January, hopefully with some suitable replacement parts. Many of my neighbors have the same issue so if we can identify a suitable part from you we will be ordering many more. For now, let me know if you have anything that might work and I will order a few samples to take down with me. Thanks & Happy Holidays,

User submitted photos of a screen door roller.
Profile picture of Paul
Paul from SWISCO responded:
Thank you for contacting us, Bill. This looks like our 84-096. Check it out and let me know what you think.
A quick learner from Minnesota says:

I think that's it! Do you offer these with nylon wheels? We are near the ocean so I'm concerned about rust or erosion from the salt air. Thanks,

Profile picture of Dave Sr.
Dave Sr. from SWISCO responded:
How about our 84-108? This has nylon wheels, though it locks into the 95-096 corner. The 84-096 locks into the 95-227 corner. Would the 84-108 and 95-096 be closer?
A quick learner says:
My don't seem to be locked in at all, because I'm able to remove the rollers without unscrewing them from a corner piece. I'm going to try the 84-108. Thanks.
Reply to Thread
Use this form to ask a follow-up question or to share your experience regarding this subject.
(your email address will be kept private and is only used to inform you when a response has been made)