Vinyl Window Tilt Latch and Sash Lift Handle Identifier

Question

Could you help me find these parts for my vinyl windows. Iv'e seen similar ones in your inventory but the dimensions aren't the same. Something close to these dimensions would work.

Color = white
Tilt Latch: Need both left and right or 8 window pairs
Length = 3 1/4" or 3 5/16"
wide = 1 1/4"
Hole center = 2 1/2"

Sash Lift Handle: (need 8)
Length = 4"
wide = 3/4"
Hole center = 3 5/8"

Thanks

James

Tom · Accepted Answer

Hello, James. We don't sell a tilt latch that matches your exact dimensions, however the good news is that not every dimension has to be the same. The most paramount measurements are the hole center spacing and the hole center backset.

You gave the hole center spacing as 2-1/2", which narrows down our inventory to just two parts: either the 26-215 or 26-475. The key component will therefore be the backset. This is the distance between the front hole center and the front edge of the latch housing. For the 26-215 this measurement is 3/4", and for the 26-475 this measurement is 5/8". Your next step is to check your own backset to see if either of ours match.

As for the sash lift, this looks like a dead ringer for our 26-116, though our dimensions are off a little. I highly recommend triple checking your sizes to be 100% sure that they're accurate, because otherwise it really looks identical.

Alternate image for 26-116