These windows are metal thermal pane from Portland Glass. I called and they do not sell the strip material.
I can't seem to get the strip out without filing the metal somehow. Your video shows using a utility knife but that appeared to be on vinyl casements.
I have measured the pile and it appears to be ( just under 1/4" tall ). The track for the slide backing material is approx. 3/16" wide.
I don't see any quick way to remove a section for photo without separating the frame....any suggestions ?
The fiber material is white.
Thank you, * Jon
Jon Brush back again,
I was able to file open the channel to get a position of strip out.
* The strip measures 3/16" wide base and mesh is 1/4" tall from to top of mesh.
* It is white, as shown in photos.
* It has a center wind block of thin plastic.
What other info might you need to provide me with the correct replacement strips ?
Thank ! * Jon
Casey from SWISCO responded:
May 7, 2020
Hello, Based on the measurements you've provided, take a look at our 58-127 wool pile weatherstripping and please let us know if you have any other questions. Thank you! |