Window Cranks

Question

Hello,
Your model #39-026 Has almost all the correct measurements except one. The top hole is not one but two holes spaced 7/16" on center line apart. Starting from the spline side first hole is 3/16 from edge to center of hole than 7/16 from center of 1st hole to the second hole center. Thank you in advance for any help.

Vernon

Dave Sr. · Accepted Answer

It's hard to recommend a particular operator without seeing a photo of your sample. However, take a look at our 39-280 and see if that matches up to yours. If you're not sure, please send us a photo of your part with dimensions to be sure.