Hello. I have a similar window but I don't know what roller assembly I need either. Could you please help me find a replacement part? I know the wheel dimensions are 5/16 OD, 3/32 width with a 1/4 wide axel piece. I've attached a picture of it. The width of the window base opening appears to be 1/4 inch or maybe 9/32 and the single screw hole is in a similar location as the original post. I also looked at another window to determine what the original part looks like. It appears to have guides on the sides for the track that it sits on.
Thank you!
Window roller assembly

Home Owner from Orlando, FL
Jan 4, 2025 3:35 pm
2 user uploaded images
4 Replies

Paul from SWISCO
Jan 7, 2025 9:16 am


Hello,
We've related a few options on this page similar to your sliding window roller. The 87-168 has a nylon housing with a 3/8" flat wheel and the 87-011 has a metal housing with locking corners. Review both options to see if one of them might work for your application. Thanks for posting!

Side view of 87-168

Profile view of 87-168

Alternate image for 87-011

Alternate view of 87-011

Home Owner from Orlando, FL
Jan 8, 2025 6:48 pm
Thank you for your reply!
It appears I only have about 1/16 inch clearance on the bottom of the window frame for it to slide properly. The frame itself is about 1/16 so it seems like 87-168 should work as it looks like it should be about 3/32 on each side. I just placed an order for 2 and will give them a try.
It appears I only have about 1/16 inch clearance on the bottom of the window frame for it to slide properly. The frame itself is about 1/16 so it seems like 87-168 should work as it looks like it should be about 3/32 on each side. I just placed an order for 2 and will give them a try.

Casey from SWISCO
Jan 9, 2025 7:59 am


We appreciate your order! Good luck with the repair, we'll be here if you need anything else.
Related Products