Need pocket door roller

Question

We have a room in our 1940s home that has a closet running the width of the room, accessed by a pocket door on each end. The track is behind the wall, and because of the construction, we would have to remove trim on both front wall and inside closet, plus remove all the frame around the door in order to remove the doors. We want to simply replace the roller hardware to see if it will help doors hang straighter and not scrub against facing when recessed and closed. As best we can measure, the piece is 3 1/4" long, wheel width is 1/2" and offset appears to be 1/4". What do you recommend?

Paul · Accepted Answer

Hi there,

We carry a new style 23-177 EZ-Roll closest door hanger. The diameter of the wheel is 1-3/16" and 1/2" thick. The offset is considered 1/16", but the wheel has a shoulder that some people consider offset is 1/4". Take a look at the dimensions on our product page to see if this will work for you. Thank you.