bi fold hardware help

A quick learner from Portland, Ore. says:
December 30, 2019
I'm trying to re- install 3 sets of Cox bi-fold doors in my daughter's house. She was left with the doors and complete top tracks (I think). The hardware in the tracks is stamped with 43-051. He are pics of the top & bottom of the doors and what was left on the tracks. Any help with the install process, needed hardware, etc wil be greatly appreciated.
Thanks, Mike
Thumbnail of the uploaded file named 20191230_112300.jpg
Thumbnail of the uploaded file named 20191230_112319.jpg
Thumbnail of the uploaded file named 20191230_112332.jpg
Profile picture of Paul
Paul from SWISCO responded:
January 3, 2020

Perhaps I can be of assistance. In the photo marked #112300, you are showing our 23-120 top roller guide and missing the 23-115 top spring-loaded pivot. 

  • In the photo marked # 112319, you are showing the 23-116 bottom threaded adjusting pivot. The other hole is left empty. 
  • In the photo marked # 112332, you are showing a Cox part that can be replaced by our 23-269 pivot bracket. Now on the floor at the bottom corner where the closet door goes, there should be a 23-316 jamb bracket. 
  • To install the door, first place the bottom 23-116 adjusting pin into the 23-316 jamb bracket. Swing the door up and place the 23-115 top pivot pin into the 23-269 door pivot bracket and snap in the 23-120 top roller guide into the track. Now you will need to adjust the 23-116 pin to square up the door and to help it to perform properly. Let me know if you have further questions.
Reply to Thread
Use this form to ask a follow-up question or to share your experience regarding this subject.
(your email address will be kept private and is only used to inform you when a response has been made)