Viewing all customer Discussions for:

Weatherization

I need to replace all of the weatherstripping on PlyGem single hung windows. I know I need brush pile weatherstripping with a fin seal, but I cannot determine how to remove the old weatherstripping. It appears to be sealed within the door. I have tried to pull it and slide it, but it will not budge ... (cont.)

Hi, Unfortunately I took this off the french door that it was on and so I couldn't a picture. But I did take a picture of door frame where it was. The weather strip lies flat on the door -- it doesn't slot in anywhere. Thanks for your help!!!

So I'm looking to replace the pile weatherstrip on these cardinal brand windows from the 90s. They appear to be 3/16 x 9/32 or so. The gap they slide into is about 1/8 in. I found several 3/16 wide items on your site but nothing as tall.

I need 15 feet, it's for a double door, I wasn't sure if 58-179 would be what I need.

No marking, numbers, or make. Glazing bead is a square c-shape, with a slightly longer bottom side. The bottom also has a small lip to hold it into the window frame.

Can you tell me what kind of weatherstripping for the door?

This is a replacement for 2001 Napco vinyl double hung replacement windows. Do you have a match?

The windows are 27 years old. three 4' windows and two 30" windows

Hello - Would appreciate help in identifying a suitable replacement weather stripping for 30 windows in my 15 year old house. Lower sash only of double hung windows. (Top smash is not as exposed to the elements and is fine for now.) The color of the existing weather stripping is almond/beige, w ... (cont.)

Model/ make unknown for patio of house built 1990.Would like to replace all seals.Thanks, Harold

My weatherstripping fell off, and I was wondering if you carry the same type. The plastic had separated from the rubber.

My Nuair windows are probably 20 yrs old. They all leak air dust an dirt from the outside. How do i refurbish the window seals?

Need weather stripping replacement around window frames

Hello I have an Anderson sliding door I would like to replace with weatherstripping as seen in the picture. I would love some assistance in identifying what I would need. Thank you.

Base is 1/8". Pile height is 1/2"

This is for bug screen.

Need replacement for this door bottom weatherstirpping - Atrium 36" inswing Door metal clad ouside over wood inside. Dated around 2010 purchased from Home Depot.

I have Weathershield doublehung windows that are about 30 years old. The windows are still in great condition, but the weatherstrip, particularly on the bottom of the lower sash, needs replacing. It has a very thin kerf piece, do you carry something that will work?

C1 846 slider C5 848 slider Weather stripping is stapled to door Both doors have same style stripping . I can make cutouts for latches. Other end of door is same continuous weather stripping Anderson discontinued availability many Years ago. Need new stripping, thanks

Sent some picture of my door frame weather stripping and bottom of door sweep I think it's called! Don't know who the door was made by, but looking for these replacement parts!