The seal appears to have a bubble on the exterior side of the door. Not sure how it is in place as I did not want to take off the door from the frame. Could be with screws or just adhesive.
Thanks for your help
exterior entry door; no identifying model number or name
Handy Person from 02048
Oct 5, 2022 9:44 pm
1 user uploaded image
3 Replies
Handy Person from 02048
Oct 5, 2022 9:50 pm
Also want to know if you have any screw caps that go on the threshold as shown in the added photo. The door seal pictured above sweeps over the threshold. Thanks for your help. Sharon
1 user uploaded image
Emily from SWISCO
Oct 11, 2022 8:49 am
Hi, Sharon.
We have our 58-189 and 58-190 door bottoms but these lack a bubble that yours has. With that said, I recommend you consider our 58-176 and 58-186 sweeps. This is designed for doors that are 1-3/4" thick and wrap around the bottom of the door and install on the sides with screws. Take a look at the specifications and see what you think.
As for the screw covers, see if our 33-251 or 67-017 match what you're looking for.
Related Products
Related Videos