in need of 4 wheel pocket door carrier replacements

A home owner from Oregon says:
I need to replace four 4 wheel pocket door carriers for two doors. Wheels are 7/8" wide spaced 2.75 apart and 1/2 inch from the base of the piece. What do you suggest i purchase to replace the broken and bent ones?
Profile picture of Paul
Paul from SWISCO responded:

The closest match we offer for your pocket door roller is our 23-161 . These have been used by Acme on their Series 1000 doors. 

A home owner from Oregon says:
Thank you, Paul. I installed the 4 wheel pocket door carriers and the pocket door top mounting brackets. The door now work, however, there's a little bit of a gap and the door hits the wall on the top before it reaches the bottom and the lock won't work. Is there a way to adjust the height on either of those mounting brackets so that I can lock the bathroom door?
Mary
Profile picture of Paul
Paul from SWISCO responded:

Sure. With an adjustable wrench, you will raise the front of the door up by turning the nut and washer down on the threaded stem of the 23-162 mounting bracket and if possible turn the nut and washer up on the back mounting bracket to lower the back of the door. This should help. Get back to us and let us know how you made out. 

Reply to Thread
Use this form to ask a follow-up question or to share your experience regarding this subject.
(your email address will be kept private and is only used to inform you when a response has been made)
Current wait time is 4-7 business days
We promise that one of our experts will personally get back to you as soon as they are able. Thank you very much for your patience and understanding. If your inquiry is time-sensitive, please feel free to reach us at (888) 991-1929 or at help@swisco.com.