metal hardware that holds up the window

Home Owner from Cherry Hill NJ

Oct 1, 2019 8:35 am

the part i am looking for is a hardward (metal) that holds the bottom of the window into the sash so the window goes up and down. Do you sell this part (see photo). The part in the photo is broken and is only about half of the full piece of hardware

Ken

1 user uploaded image

6 Replies

Tom from SWISCO

Oct 4, 2019 12:48 pm

Hey, Ken. This part is called a pivot bar. We actually carry a ton of these, and more than a few that come in this style. I'm not sure what to start with. Can you tell me the distance between the center of the first hole to the front tip? That will help us narrow down the list of possibilities.

In the meantime, you can see our entire selection here.

Home Owner from Cherry Hill NJ

Oct 4, 2019 6:10 pm

If you are located in Camden can I come in the parts and buy replacements on the spot?

Tom from SWISCO

Oct 7, 2019 10:46 am

I'm afraid that won't be possible. Our location is just a processing facility. We have no way to meet with or accommodate customers.

Home Owner from Cherry Hill NJ

Oct 9, 2019 5:46 pm

Ok on no visit. From center of fist hole to hammer head end is 1.5 inches. See photo

1 user uploaded image

Tom from SWISCO

Oct 10, 2019 8:52 am

I'm afraid that we don't have a pivot bar with a 1-1/2" front hole spacing. Can you confirm?

The closest match we have, just eyeballing the hole pattern, is our 26-241. I know it only has one "horn" on the front tip instead of two, but it should still work fine. The only question is hole spacing.