need this part

Question

greetings,
Just removed this part from my window. After reading a post from another customer whos had the same numbers on the pivot, you recommended 15-118 however the window hardware has two pins that stick out. The photo I sent is the exact number however 15-118 doesn't have the correct opening on the pivot which would accomomdate these two pins that extend. any suggestions for the correct part number?

Paul · Accepted Answer

Thanks for reaching out to us. The 15-219 pivot shoe will accept the "T" nose pivot bar. The dimensions of this pivot shoe are 1-1/4" wide by 17/32" thick. If it is too thin for your sash, you can use the 15-118 which is 9/16" thick, and file off the horns on the old pivot bar. Take a look and see what you think.