Viewing all customer Discussions for:

55-120 3' Snap-in

Glazing beads.

Do you have a replacement for this? The windows are aluminum with a GA on the locks. The exposed portion of the strip is just under 1/4 in thick by 1/2 inch wide. Ive removed similar windows that were vinyl, but the existing on these is very brittle so I am afraid it won't hold up on reinstall. ... (cont.)

I need to replace Vinyl Window Glazing Bead of Three windows .

I am Maintenance Director for a Special Needs educational non-profit facility in Atco NJ. We have a tall Bronze colored casement window, with two panels that slide side to side. The bronze colored window glazing strips have been pulled out of the windows and discarded on the top, and left side of on ... (cont.)

Hello, Between age and hailstorms, our vinyl window bead is pretty rough shape so I would like to replace it. I'm having a hard time matching what is on the house. I've uploaded some pictures to see you if you have any suggestions. Thanks, Brett

3 decades in New Mexico sun leave our glazing beads brittle and discolored. No longer white and broken in places. I can match several dimensions to 55-180 but not all. The 3/16 is spot on and so is 7/16 side. Are all the dimensions relevant, required for replacements? 55-120? Thanks for help! Micha ... (cont.)

Please assist in helping me locate this glazing bead on your website.

I need the window retainer seen in the photo. I need 5/8 window grid material and the clips that hold it in.

I need help finding the vinyl snap-in glazing part in the photo attached. It measures to be 9/16" x 3/8" cross section. I'm Adrian

Window has GA on it.

No markings to help. Thanks Andrew

Will be needing many of these on an upcoming job

I'm trying to find this glazing bead for our windows. Our house was built in 1999. Thanks! -Bobby

No markings but house (stucco) built in 1996 in Southern Nevada.

I believe this is a snap-in glazing. It came off of my vinyl window. I have a few other windows where this has cracked. I'd like to replace these. Do you have this part? The window is a DH-R35.

I am sure you'll help me to find it...

I have 23 yr old wi dows where the vinyl window casing is cracking and breaking g away. I would like to replace, but unsure of the part to order. Casing is 1/4 inch square with a 1/4 lip that goes under window.Do you have a part to recommend? Or can I simply use some glazing compound and or weath ... (cont.)

I need help finding this 1/2" glazing strip. See attached collage.

This is a vinyl glazing bead its not the original but its what works as a substitute for a milgard window do you have this in black?

Need help finding right one. Thank you.