Viewing all customer Discussions for:

95-244 Offset Corner Pair

hello, I'm seeking your help to identify the parts to reassember my storm windwo. the pictures of "thicker" and "thinner" are the corner key, which are borken. I noticed the "thinner" one is 1/8 thinner than the "thicker" one. Additionally, for the "top 2", I am not sure if it is rasied or straighte ... (cont.)

The sliding bolt is with the handle on the picture, but I don't need the handle, just a straight one. I chose the best I could, sine I couldn't fine exactly the same as mine, but I hope those will work fine

The tilt keys are marked 1350. The lower keys (no tilt pin) are marked 1349 I have found several keys that are 5/32 thick but none with a 5/32 thick leg and a 3/32 leg. Do I need to get some 5/32 keys and mill one leg down to 3/32? Other suggestions? Thank you!

Old storm door. Looks like lead corner. 1.5" x 1.5". I would guess one of the larson kit sets. Can i buy this as a set and not the other type?

I am looking for the two lower corner keys for storm window on exterior door which broke. Image one says: 208 R on one arm; 1 on the other arm Image two says: L 802 on one arm; 4 on the other arm I've purchased corner keys recently from you and they were not correct. Thanks for your help ... (cont.)

The bottom horizontal rail of the window/screen has a larger channel for the corner key than the vertical side rail. I tried part 95.016 which is 3/16" on both legs. It went easily into the bottom rail, but I could not get it into the vertical side rail. The vertical side rail opening looks to me ... (cont.)

I am very happy to find your web site. Can you identify the top guides for a self-contained sliding window for an old storm door? The picture file named "window top right" shows the piece that holds the window in the door channel. The nib that fits in the channel is broken on the left and right s ... (cont.)