Viewing all customer Discussions for:

32-057 13-3/4" Self-Closing Drawer Slide Pair

Hi, The little piece of white plastic has broken. Now the slides von Unigrass 6000 do not hold together. The length of the slide ist 35 cm. Let me know how to repair. Best SERGE

I just need to replace the left side

I am unable to find this black sliding drawer rear bracket anywhere. Please suggest thanks

I need to replace this to mount my drawer but cannot find the part

I am relocating my drawer to a different cabinet. How much for a pair of brackets?

Appears the cabinets are Mastercraft. Need the backplate support piece for the slide rail.

Hi! This bracket has wings on both sides, but one is broken in the photo. These sit horizontally. The brackets have no identifiable marks as to manufacturer. It is a single piece. It is about 1 5/8 long by 1 3/8 wide. I need at least 8 of them. Please help. Thank you!

This part hangs the back of a drawer rail ..... The cabinets are made by Merilat and the hardware associated are branded with a "grass" logo or a G* logo. The cabinets were made in the mid to late 1990s. Thanks in advance for your help finding this part

Need this rear slide bracket for pullout cabinet drawer.

Only marking is that it's made in China

I'm having trouble identifying the parts shown. I need the rails and the stopper part that attaches to the metal bracket. I'm hoping this picture is clear enough for you all to identify these particular parts.

The Hettich 602 has a wall side upper and lower slots for the support bracket. This feature makes the SWISCO 32-089 Back Plate incompatible with the Hettich 602. The 32-012 is too short (2-1/2"). The Hettich 602 is 3-3/8".

I'm looking for a replacement part for what I believe are Rutledge cabinets. This the rear mount for the back of the cabinet. The picture is of the left side railed mounted. The right side is what I'm looking for. The only identification I can find in on the drawer itself.

Do you have it in stock?

" ATC JBS08A 10.0mm" is on the inside of the hardware

I'm hoping to add to an existing set of sliding drawers using the same mounting system. It seems like the plastic bracket fits into holes that are similar to adjustable height shelves, but I can't find anything like it. The cabinets say they are "handmade in Oregon" and "inspected in factory #2" but ... (cont.)

The plastic/urethane end of the right drawer bracket cracked into three pieces. I need a replacement part or the entire bracket assembly. Best I can tell the whole assembly number is 00045-51, 6603/582/cl-cr/AI. Stamped into plastic/urethane end bracket Pat# 4930739. I tried to include a picture of ... (cont.)

I can't find this. It's the rear slide mount. The photo is missing one of the plugs that goes into the back of the drawer slides.

Looking for guide that fits ~1 1/8" slide.