Viewing all customer Discussions for:

32-078 Drawer Guide

The part is the exact same In all 3 pictures. It is screwed into the far end of the rail underneath each kitchen drawer. One of the parts broke off. So now there's nothing to hold a draw up when you go to pull it out.Is there anyway you can help me please.Thank you,Martin

I need 2 replacement Center slides/glides/tracks for older Merrilat kitchen cabinet drawers. Merrilat no longer make parts for their older cabinets. I found #32-053 drawer track kit on your site. Can the track be cut shorter so it will fit the length of my drawer? The drawer length is about 18" ... (cont.)

This part is on the bottom and the center of the kitchen drawer.it is sliding in the rail and the same time is holding the drawer in the position so it not falls out .can not find the replacement. Thanks for helping me stan

So I need this little plastic piece that keeps the drawer in the track. The pictures are of a drawer that functions properly, but I'm having trouble locating a replacement piece for another drawer that is broken. It might help if I actually knew what the piece is called.

Can you help me finding this guide. Everything is the same except the rise spot where the screw goes threw.

Small plastic part that Mounts on drawer rail and Slides in between the rails Mounted in the cabinet

The pictures are of the middle drawer and drawer box. It's the bottom Drawer and drawer box below that that's broken.

Do you have any parts like this

I need this replacement part. It is plastic. Measurements 3/4" x 1/2"

I need 6 of these guides. No marking on the aluminum track

Do you have drawer back stops or know someone who carry these old drawer stops so they don't fall out it's got one in the center of the drawer on the back of it

Drawer back plate ?

Our cabinet drawer had a part break. There is a slider rail in the middle of the bottom of the drawer. The part that broke was at the back of the rail. It kept the drawer from getting off center as the drawer closed. Thanks

The only mark I see is "14". It measures .75x.50" it is about .50 in height. This part screws on to the beginning of the drawer guide.

Our nylon drawer glides are breaking off the bottom back of our drawers. These pieces drop into the slot at the start of the track and stay in the slot to keep the drawer in. We have looked all over for these - please help us identify where we could buy replacements! Could these be printed with a ... (cont.)

Rear drawer "guide bracket" Need 3 replacements

need end rail plastic pieces.montgomery woods complexthanksbill

The picture is the bottom of my kitchen drawer. It has a white guide on the metal slide. The guide broke, I tried to glue it back but it keeps breaking. any idea what this part might be? Thanks.

I'm trying to find out anything about the bracket that *should* be in the very back of the track on the underside of the drawer. The pictures are of the drawer that is complete. There's another one missing that small plastic piece which slides into the track under the drawer. I've jury-rigged a par ... (cont.)

Hello guys. Hopefully, you either carry this part,or might locate it. Thanks. Andre